Family-owned in the San Tan foothills since 2012

Worry-free
weekly pool service.

A consistent route, owner-operator oversight from Chad on every account, and the same East Valley team servicing Queen Creek, San Tan Valley, Mesa, Chandler, and Gilbert every week of the year. You enjoy the pool, we do the rest.

Get a Quote See published pricing

What’s on every visit

The weekly checklist, line by line.

A weekly pool route looks the same from the outside — a truck pulls up, a net comes out, a chemical test reads green. The difference is in the work that happens between those obvious steps. Here’s what a Wild Coyote weekly visit actually covers.

Step · 01

Brush walls & steps

Plaster, pebble, tile, and steps get brushed every visit to prevent algae from gaining a foothold and to keep calcium from settling at the waterline. Brushing is the work that filters can’t do.

Step · 02

Skim the surface

Palo verde blossoms, mesquite pods, monsoon dust, the occasional bird — the East Valley puts a lot in the water. We skim the surface and the steps before the debris drops to the floor.

Step · 03

Empty baskets

Skimmer baskets and pump baskets emptied every visit. Full baskets choke flow, starve the filter, and shorten the life of the pump motor — one of the cheapest tasks with the biggest equipment-protection payoff.

Step · 04

Backwash the filter

Sand and D.E. filters get backwashed on the schedule the filter calls for, not on a calendar. Cartridge filters get checked for pressure-rise and pulled for a full clean when the gauge says it’s time.

Step · 05

Full chemical analysis

Five readings every visit: free chlorine, pH, total alkalinity, cyanuric acid, and calcium hardness. We add what the water needs, not what the truck is loaded with.

Step · 06

Seasonal timer adjustment

The pump runs longer in July than in January. We adjust your timer with the season so you’re not paying to circulate water you don’t need to — and so the system is running long enough when the heat hits.

How service starts

Four steps from first call to first visit.

We don’t sign anyone up sight-unseen. Every new route starts with an in-person walk-through with Chad so the chemistry baseline, the equipment condition, and the service-day logistics are all on the table before any work begins.

Step · 01

Free in-person walk-through.

Chad meets you at the pool, looks at the pump, filter, timer, and any in-floor system, takes a baseline chemistry reading, and writes a flat-rate quote on the spot. No phone-tree quotes — the price needs the pool in front of it.

Step · 02

Onboarding visit.

The first service visit is longer than the routine ones because we’re establishing the chemistry baseline — correcting whatever’s out of range, cleaning the filter if it needs it, and bringing the water up to the target the route will hold.

Step · 03

Weekly day & route set.

Your house gets locked into a specific day of the week based on which East Valley city you’re in. Same day, same time window, same tech — not a rotating dispatch board.

Step · 04

Monthly chemistry summary.

At the end of each month you get a summary of the readings, what we added, and any equipment notes — so you can see what’s actually being done to the water, not just that the gate’s been opened.

Also covered on the route

Salt-water pools, handled the same way.

If your pool runs on a salt chlorine generator, the weekly visit looks the same on the surface — brushing, skimming, baskets, filter — with the added work of testing salt levels, inspecting the cell, and watching for the scaling and stray-current issues that salt systems quietly create.

Salt-system households don’t pay extra for the chemistry routine; it’s part of the weekly service. Cell cleans, replacement cells, and generator repairs are billed separately when needed, with the price quoted before the work.

See salt-water details

From the route

What customers say about the visits.

Chad explained the pros and cons of the pressure vac that I had versus a suction vac.

Wild Coyote customer

via Yelp

Common questions

What homeowners ask before signing on.

Plain-spoken answers to the questions we hear most when a new East Valley homeowner is comparing weekly pool services. If yours isn’t covered here, call (480) 276-7700 — Chad or someone on the route will pick up.

We quote a flat monthly rate at the in-person walk-through so the bill is predictable from month to month. The rate is based on pool size, equipment type (cartridge / D.E. / sand, salt or chlorine), and your East Valley city. Published pricing for filter cleans, drains, acid washes, and equipment work is on the pricing page.

If a monsoon storm hits on your service day, we still come — the post-storm visit is often the most important one because the rain knocks the chemistry sideways and washes debris into the pool. If a storm makes the visit unsafe to perform, we re-route to the next available day on your route and let you know by text.

No. Most of our routes run while customers are at work. We need gate access (a code, a key in a lockbox, or a side gate left unlocked on service day) and we’ll text you if anything looks off — equipment issue, low water, anything that needs your attention.

Yes. Chlorine, acid, cyanuric acid, calcium, and standard salt are included in the weekly rate — we add what the chemistry calls for, not what the truck is loaded with. Pool-shock-level events (algae bloom, post-party recovery, after a green-pool cleanout) may need additional chemicals; we’ll quote those before adding them.

Service days are fixed by city block to keep routes tight and the visit consistent. Chad will tell you your service day at the walk-through and your route doesn’t change unless you ask us to switch it. Queen Creek, San Tan Valley, Mesa, Chandler, and Gilbert are all on the rotation.

Yes. We inspect in-floor cleaning heads during the weekly visit, adjust the valves as needed, and handle repair work on the system when something fails. In-floor systems do most of the floor-cleaning work between visits when they’re tuned right — and most underperform because nobody’s adjusting them.

Yes. If we’ve drained and acid-washed your pool, the start-up process — balancing the water back up over the first ten to fourteen days — is included in the work. If you’re a weekly customer transitioning back to the route after a drain, the start-up rolls into the regular visit cadence.

Ready for a weekly route you don’t have to think about?

Chad will meet you at the pool, look at the equipment, take a baseline reading, and write a flat-rate quote on the spot. No phone-tree estimates — the price needs the pool in front of it.

Get a Quote Call (480) 276-7700

Related services

Other work we handle for route customers.

Weekly route customers get priority scheduling and route-customer pricing on every service below. Published pricing on the pricing page.

Service · 02

Filter cleaning

Cartridge cleans from $100, D.E. cleans from $100, sand-filter media swaps from $300. The filter that’s easiest to ignore is the one keeping the route working.

See filter services

Service · 03

Equipment repair & install

Pump and motor swaps, filter installs, timer replacements, in-floor cleaning-system service. We diagnose first, quote in writing, and source the part before scheduling the install.

See equipment services

Service · 04

Green pool cleanouts

Pool drains from $150, acid wash and chlorine bath from $150, glass-bead blasting on heavy staining. Most green pools can be saved without a full drain — the walk-through tells us which.

See green-pool services